Why Shimmer! deserves a simple, consistent routine
Shimmer! is a 100% silicone, rechargeable vibrator with a waterproof design, five speeds, and five patterns. Because it is silicone and waterproof, cleaning is straightforward, but the electronics inside mean you need to handle the charging and deep-cleaning steps with a little care. This guide walks through the supported routine: hand washing after each use, occasional deep cleaning, sensible charging habits, and safe storage.
The catalog gives clear cleaning instructions but does not specify charging time, battery life, or exact storage conditions. Where that information is absent, this article notes the gap rather than guessing. The goal is to help you build a routine that keeps Shimmer! ready to use without overcomplicating things.
Shimmer! at a glance
- Shimmer! ✨: 100% silicone construction with a 1" diameter and 5.5" height. Silicone is the reason hand washing and deep cleaning are safe; the dimensions help you judge how it fits your routine and storage.

Shimmer! ✨ - Shimmer! ✨: Rechargeable, waterproof, with 5 speeds and 5 patterns. These features shape the care steps: you can wash it without worrying about splashes, but you still need to manage the charging port and battery.
- Shimmer! ✨: Available in Moonlight and Sunshine color options. Color choice does not change the care routine, but it is useful to know when ordering replacement or coordinating storage.
Hand washing after each use
The catalog instructs hand washing with soap and water. This is the baseline step after every use. Because Shimmer! is waterproof, you can wash it under running water without damaging the internal components, but avoid submerging the charging port area for long periods if the port cover is removable or open.
- Step 1: Remove the electronics: If your Shimmer! has a removable vibrating core or bullet, take it out before washing the silicone body. The catalog's deep-clean instructions mention removing electronics, so this applies to hand washing too.
- Step 2: Wash with soap and water: Use mild soap and warm water. Lather the silicone surface, including the flippers and tail curve, then rinse thoroughly. Avoid harsh cleaners or abrasive sponges that could damage the silicone.
- Step 3: Dry completely: Pat dry with a clean, lint-free towel or let it air dry. Make sure the charging port and any seams are fully dry before storing or recharging.
Deep cleaning: boiling or dishwasher
For a deeper clean, the catalog says you can remove the electronics and then boil the silicone or put it in the dishwasher. This is a periodic step, not something you need after every use. Boiling is straightforward: separate the silicone from any electronic parts, place it in a pot of boiling water for a few minutes, then remove carefully and let it cool. Dishwashing works on a normal cycle, but avoid high-heat drying if your dishwasher has that setting, as extreme heat can degrade silicone over time.
The catalog does not specify exact boiling times or dishwasher temperature limits, so use common sense: keep it short, avoid harsh detergents, and never put the electronic components in water or the dishwasher. If you are unsure about your dishwasher's settings, hand washing is always a safe fallback.
Charging tips for the rechargeable Shimmer!
Shimmer! is rechargeable, but the catalog does not list charging time, battery life, or the type of charging cable. These tips focus on what you can control: keeping the port dry, using the right charger, and avoiding overcharging.
- Charge before first use: New rechargeable toys often arrive with a partial charge. Plug it in until the charging indicator shows full, then unplug. The catalog does not specify indicator behavior, so check your unit's light or display.
- Use the supplied cable: If Shimmer! comes with a charging cable, use that one. The catalog does not confirm the connector type, so avoid substituting unless you are sure it matches.
- Keep the port dry: Make sure the charging port is completely dry before plugging in. Even waterproof toys can be damaged by moisture in the port.
- Avoid overnight charging: Unplug once fully charged. The catalog does not state whether Shimmer! has overcharge protection, so it is safer not to leave it plugged in for long periods.
Storing Shimmer! safely
Store Shimmer! in a cool, dry place away from direct sunlight and heat. Because it is silicone, it can attract lint and dust, so a storage pouch or box is ideal. The catalog does not specify a particular storage container, but keeping it separate from other silicone toys can prevent surface interactions. Make sure it is completely dry before storing to avoid mildew or degradation.
If you travel with Shimmer!, use a discreet bag and lock the controls if possible. The catalog does not confirm a travel lock feature, so check your unit. For more travel-specific advice, see our separate guide on traveling with CLF vibrators.
What the catalog does not cover
The supplied information leaves some gaps. Rather than guess, here is what is not confirmed:
- Charging time and battery life: The catalog does not state how long a full charge takes or how long the battery lasts per charge.
- Exact boiling duration: The catalog says you can boil the silicone but does not specify a time. Use a short boil (a few minutes) and avoid prolonged heating.
- Dishwasher temperature settings: No specific temperature limit is given. Use a normal cycle without high-heat drying.
- Storage temperature range: The catalog does not provide a safe storage temperature range. Keep it at room temperature and away from extreme heat or cold.


